Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

405 North Jefferson Avenue
Springfield, MO, 65806
United States

417-839-7677

StepNpull® is a foot operated door opener that works on any commercial solid core wood or metal door. Available in three stylish finishes.

When you invest in making your restrooms touch free, yet your customers are still having to touch the dirty door handle, what's the point? StepNpull® foot operated door openers offer a low-cost and effective way to ensure your customers have  germ-free option when exiting your restroom. Simply step and pull, it's that easy! 

Easy Installation

IMPORTANT: StepNpull® will work on any commercial solid core wood or metal door regardless of the door’s size or weight. If the door is abnormally difficult to pull open, adjust the door closer resistance to the ADA standard of 5 pounds maximum.

  1. StepNpull® should be mounted approximately ⅛" from the bottom and and outer edge of the door.
  2. Mark the holes with a pencil while holding the StepNpull® against the door at a level mounting position. If a metal kickplate is on the door, drill ¼" holes where marked before moving onto next step. (Only go through metal kickplate, not through door).
  3. Wood Doors: Once holes are marked, use provided screws to create a ¼" pilot hole. Use the provided sexed bolt for the middle hole, and the 1 ¼" #12 screws for the outside holes.
  4. Metal Doors: Once holes are marked, use provided screws to create a 3/16" pilot hole. Use the provided sexed bolt for the middle hole, and the 1 ¼" #12 screws for the     outside holes. To prepare the center hole, use a 5/16" bit to enlarge the center hole, while drilling through the outer metal skin. (Be sure to keep the drill perpendicular to the door while drilling). Remove any burrs and use Loctite hread locker on all bolt threads. 
  5. Open door fully and check for any interference issues with wall or floor mounted door stop.
  6. Install instructional decals above door handle.